-Linkage is in good overall condition 

-WILL NEED BEARINGS REPLACED

-Normal signs of wear

-Marks and scratches

-RIDE ENGINEERING 

-Comes as pictured 

FROM RIDE ENGINEERING: This product is designed to balance out the chassis on KTM & Husqvarna models. The link is 1.3mm longer than stock and will lower the back end 10-11mm and help keep the bike more balanced off jump faces and over rough terrain. This link reduces wallowing, puts more preload on the shock spring and helps the shock use the full range of travel. Recommended sag with the Rideng Link is 100-103mm. This same link will lower the rear on the FE 250/350/450/501 '14-'16 33mm (1 1/4")! Set the fork between 12-15mm from flush and use around 100mm of sag. If you're a vertically challenged desert rider, this set up handled good in the dry loose dirt, ate up the hard pack whoops and still provided a cushy ride. Best of all while riding back home its much easier to reach the ground at traffic lights. Husqvarna redesigned the FEs in 2017 and each model rides about 13mm lower (1/2") stock. This same link will also lower these models: FE 250/350/450/501 '17-'23; TE 150/250/300 '17-'23; 19-20mm (3/4"). If you own a '17 +, set the sag between 100-105 and slide the forks up 10-12mm in the triple clamps.

Fits:

GasGas MC 125 250 350 450 2021-2022

KTM SX SX-F 125 250 350 450 2016-2022

Husqvarna FC 250 350 450 2016-2022

(May fit other years & models)